• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: China (Mainland)
  • Brand Name: Buyer's logo
  • Model Number: ES-LS-MF07G
  • Type: Laser sight
  • Sort: Green laser sight, Laser sight, laser scope, led flashlight, led light
  • Red laser wavelength: 532nm
  • Battery runtime: 3-10 hours
  • LED brightness: CREE Q5 led 200 lumen
  • Battery: 2XCR123A
  • Laser output: 5mw
  • Single unit net weight: 160g
  • Combo size: 95x40x45mm

Packaging & Delivery

Packaging Details Packing: 1 unit/gift box, 50 units/master carton, Gift box size: 105X65X45mm, Master Ccarton size: 400X300X200mm, Unit package: Gift paper box, Master Carton: Top cardboard carton, GW: 9kgs
Delivery Time 20-30 days for MOQ qty, 50-60 days for 1k pcs or OEM order


Tactical strobe green laser sight with led flashlight combo
1.Tactical green laser of 5mw 532nm
2.200LM CREE Q5 led flashlight

Model:  ES-LS-MF07G


Name: Tactical Hunting Strobe Green laser sight and led light combo for picatinny rail, Green laser sight, Laser sight, laser scope, laser sight and led light combo, led light, led flashlight

Product Origin: China

Supply Ability: 1000 pcs/month

Minimum Order: 100 pcs 

Delivery Lead Time for MOQ: 20 days







Product Description



Wavelength: 532nm

Power Output: 3 W

Laser Type (mw): 5

Battery: Two CR123 Lithium Batteries

Battery Life: 3 hours of runtime

Lamp cup radiation angel: 45 degree



LED detailed information

LED model: CREE Q5 LED-003

Power: 3W

Diameter: Ø 8 mm

Length: 85 mm

LED brightness: Up to 200 lumens blinding beam, Bright sidelight

LED radiation angel: 120 degree

Light color: Cold white

Max electric current: 750mA

Working Temperature:-20 ~ +85

Storage Temperature:-40 ~ +85

Light attenuation: Less than 3% after 100k hours

Life time: ≤ 50000 hours 



Laser detailed information

Model: LD-650-5X

Diameter: Ø 5.6 mm

Length: 5 mm

Working Temperature: +10 ~ +45

Storage Temperature: -50 ~ +65

Max electric current: 50mA

Life time: ≤ 5000 hours 

Working volt: 3V


Weight with Battery: 160g

Warranty: Extended Warranty

Construction: Aircraft aluminum 7061-T6

Finish: Anodic oxidation/ V' r3 black

Operation: Ambidextrous Momentary/Steady on-off Switch

Rail Mount: Integrated mount




Packaging & Shipping




Laser sight and LED Flashlight integrated group

Calibration tools

2 CR-123A lithium batteries

User manual





Packing: 1 unit/gift box, 50 units/master carton

Unit package: Gift paper box

Unit package box size: 10.5X6.5X4.5cm 

Master Carton: Top cardboard carton

Carton size: 40x30x20cm

NW: 6kgs

GW: 9kgs





Quick target acquisition



Safe and adjustable

Dust and Shockproof

Ambidextrous Momentary/Steady on-off Switch

Machined anodized aluminum housing

Fits existing light bearing holsters

Adjustable mount flexibility that can accommodate the Glock or Picatinny (1913) accessory rails.





For a laser mounted below or to the side of the bore, there is only one distance where the bullet path will coincide with the laser sight line, this point is the zero range.

Laser adjustment and the muzzle velocity of the bullet determine where this point occurs. The user must decide how high above or below the sight line the bullet can be allowed to strike and adjust the sight accordingly. At distances less than the zero range the bullet will be above the sight line. Beyond the zero range the bullet will be the sight line.

If mounted to the side, the bullet will also deviate to the side of the laser line, as well as up and down. In practice, a XL-2LL on a handgun can be adjusted to keep the bullet strike within about 2 high and 2 low out to about 100 feet.





The ES-LS-MF07G laser sight and led light combo uses 2x CR-123 (6V) batteries. The CR-123s negative and positive pole has been indicated on the mount.



DANGER: DO NOT use anything other than a CR-123 battery or rechargeable batteries with this product.



To access the battery compartment you must first remove the flashlight from the firearm. Follow the MF removal procedure instructions to remove the flashlight from the firearm.


1.       Unclip the door latch, the latch is tight, it may help to use a coin.

2.       Slip the batteries from the flashlight.

3.       Insert the new batteries observing polarity. Note: The flashlight is polarity protected and will not light if the batteries are inserted incorrectly.

4.       Hold the battery switch/door at an angle and place the small tab on the bottom of the battery/door switch into the slot in the flashlight body.

5.       Firmly push and hold the door closed against the flashlight body.

6.       Swing the door latch over the door and snap it into place.





Make sure that the firearm is unloaded and the breech is open. It is imperative that safety measures by employed at all times while handling the firearm.




1. The MF is design to be quickly attached or detached from the side of the weapon or accessory rail.

2. Loosen the rail clamp tension bolt.

3. Angle the MF, placing the fixed portion of the rail clamp against the accessory rail and align the rail key with the appropriate cross groove in the accessory rail.

4. Slightly depress the tension bolt to open the rail lamp, rotate the MF into place and release the pressure on the tension bolt to snap the light in place.

5. Check for fit and tighten tension bolt until the MF is securely attached to the firearm.




The MF rail clamp tensioning bolt requires an application of high quality gun oil to keep it rust free. Use a soft cloth and mild detergent to clean the glass LED lens and keep it free of dirt and grime. The laser aperture (LS-MF) can be cleaned with a Q-tip 9or similar item) and mild detergent.

Note: always avoid aggressive cleaning solutions as they may damage the MF. 




Note: The MF rail key can be changed to accommodate several varieties of mounting rails. Remove the rail key screw with a 7/64th hex wrench and pull the rail key from the body. Insert the new rail key and fasten it in place with the rail key screw.



Our Services


Product Warranty, Shipping Method and Payment Method


Warranty, we offer 12 months limited warranty for our products. Damage due to misuse, ill treatment and unauthorized modifications and repairs are not covered by our warranty.


Shipping Method, We provide comprehensive shipping methods, for small quantity orders we ship by DHL Air-Express, or EMS/TNT Express service, it is safe and fast. For large quantity orders we can ship by Air transportation or sea transportation, also we can ship order to buyer’s cargo agent in China. We quoted prices are EXW price, don’t include shipping cost.

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Trading Company
Transaction Level:
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $29,000
Learn More